Home

What Safety Precautions Should You Take on a Video Set?

The most important video set safety precautions are to check every setup for hazards, assign qualified people to electrical work and rigging, keep exits clear, and plan for emergencies before filming. You also need a clear stop-work procedure, controlled access to hazardous activities, and enough time to reset equipment without rushing.

Check for hazards before setting up

Start your safety review during the location scout, then repeat it when the crew arrives. Check the floors, access routes, available power, overhead clearance, and any changes you plan to make, such as darkening a room or moving furniture.

Designate a safety contact who has authority to pause production. On a larger shoot, you may divide responsibilities among the assistant director, department heads, location team, and dedicated safety professionals. On a small shoot, assign those responsibilities explicitly rather than assuming the director will notice every hazard.

Hold a short briefing before work begins and whenever a setup introduces a new risk. Cover these points:

  • Identify the hazards specific to the scene and location.
  • Name the people authorized to operate specialized equipment.
  • Explain the stop-work call and how everyone should respond.
  • Point out exits, first-aid supplies, and the assembly point.
  • Confirm who will contact emergency services and meet responders.

Give everyone stop-work authority, including performers and visitors. If someone reports a hazard, pause the activity, make the area safe, and have the responsible person approve the restart. Don't treat a camera rehearsal as a substitute for a safety briefing.

Prevent electrical hazards

Before plugging in lights, have a qualified person check the available power supply, circuit capacity, and planned loads. Several outlets may share one circuit, so spreading plugs around a room doesn't necessarily distribute the load. Don't bypass grounding connections or improvise adapters to connect incompatible equipment.

Inspect cables, plugs, power distribution equipment, and fixtures before use. Remove damaged equipment from service instead of covering a defect with tape. Use equipment rated for the conditions, and keep electrical connections away from liquids.

Disconnect power before electrical work, and don't assume a fixture's off switch makes its wiring safe to touch. OSHA's electrical safety-related work practices describe de-energizing requirements and restrict work on exposed energized equipment to qualified people.

Route power cables away from walking paths whenever possible. Where you can't avoid a crossing, use a suitable cable protector and secure it so people won't trip over it. Don't run cables through doorways where closing doors can crush them.

Secure lights and overhead equipment

Choose stands, mounts, clamps, and supports that can safely carry your equipment in its planned configuration. A payload rating alone doesn't confirm that an extended arm, offset fixture, or improvised mounting point is safe. Have a qualified grip or rigger approve overhead loads and unfamiliar support arrangements.

Place stands on stable surfaces, secure their bases appropriately, and keep their legs out of walkways. Use manufacturer-specified secondary safety attachments for overhead fixtures where required. A safety cable is a backup, not a substitute for a properly installed primary attachment.

Establish an exclusion zone while your crew installs or adjusts equipment overhead. Secure tools and loose accessories so they can't fall, and never let crew members work directly beneath an unsecured load.

Use suitable ladders, platforms, or lifts for elevated work, not chairs, stacked cases, or improvised supports. You may need fall protection and trained operators for elevated camera positions. If the setup exceeds your crew's training or equipment, change the shot or bring in a qualified specialist.

Keep walkways clear during filming

Mark equipment storage areas so cases, bags, and spare stands don't accumulate along access routes. Keep enough lights on for people to move safely between takes, especially after filming a scene in darkness. OSHA's exit route requirements specify that you must keep exit routes clear and unobstructed.

Rehearse handheld, dolly, and gimbal moves slowly before recording. Assign a spotter when the operator can't see the route, particularly when moving backward. Make sure the spotter has an unobstructed view and isn't carrying equipment that would prevent them from intervening.

Check more than the camera's path. Performers, focus pullers, boom operators, and cable assistants may move through different areas. Keep anyone who isn't involved outside the movement zone, and agree on a clear stop command.

Use carts or lift with a partner for awkward equipment, and clear the destination before lifting. Schedule breaks and reassess demanding moves when fatigue affects coordination. You may also need hearing protection around loud equipment or effects. Choose a communication method that lets everyone hear safety instructions while wearing that protection.

Hire specialists for high-risk scenes

Don't improvise hazardous action to save time or money. Bring in a specialist to assess the activity, establish exclusion zones, rehearse the sequence, and explain when everyone needs to stop immediately.

  • Stunts and falls: Use a qualified stunt coordinator for action involving impacts, fights, falls, or other foreseeable injury risks.
  • Weapons: Use qualified weapons personnel and procedures that restrict access; never allow live ammunition on set.
  • Moving vehicles: Use qualified drivers and appropriate camera support rather than asking an operator to ride unsecured.
  • Smoke and haze: Review the product's safety data sheet, ventilation needs, and exposure controls before use.
  • Flames and pyrotechnics: Hire qualified effects professionals and obtain required permissions before planning the shot.

Consult the applicable industry safety bulletins available through Contract Services during planning. If an activity requires permits, insurance, or regulatory approval, confirm the requirements with the responsible authority and consult qualified legal or insurance professionals as needed.

Prepare for an emergency

Put the exact filming address, access instructions, emergency contacts, and assembly point on the call sheet. Verify that phones or radios work where you'll film. Assign someone to meet responders and guide them past locked entrances or controlled-access areas.

Keep first-aid supplies accessible and identify trained first-aid personnel. For serious injury, electrical shock, breathing difficulty, or loss of consciousness, contact emergency services promptly. Don't enter an electrically hazardous area or attempt a rescue that could create another casualty.

After an incident or near miss, stop the affected work and correct the hazard before restarting. Brief everyone whose work the hazard affects, including crew members who arrive later.

Sources